s Hi everyone, are 6:30 am and finally I managed to configure the USB Modem
Icon 225, Orange.
This USB Modem as an offer to acquire Orange Internet Everywhere
and was accompanied by a
Acer Aspire On
e 
As the challenge was to configure the connection this 3G Modem and this
Laptop as I am very "Cabezón" at the end I succeeded. (At 6.30 am, but got). The information I have achieved in this Web
, is in French and my little knowledge in this language, because I could create this entry. If you had doubts Offer to Acquire Orange or another company that will give you the Icon 225 Modem , then do not hesitate to assure you follow this guide to get connect.
begin, we need to have prepared the system to compile, follow these steps
to carry it out.
Important: NO PLUGS
the modem
until we get to Step Edit File: Conninfo.ini. We downloaded the following package:
icon225.tgz
from the console with this command:
julian @ julian-aspire: ~ $ wget http://www.equinoxefr.org/wp-content/uploads/
2008/11/icon225.tgz - 19/11/2008 6:31:12 - http://www.equinoxefr.org/wp-content/uploads/2008/11/icon225.tgz Solving www.equinoxefr.org ... 88.191.58.239 Connecting to
www.equinoxefr.org in which the package is downloaded run the following command:
julian @ julian-aspire: ~ $ sudo tar xvf
icon225.tgz
hso /
hso/hsoconnect-py2.5_1.1.83_all. deb
hso/hsolink_1.0.46-1_i386.deb
hso/hsolink-1.0.118 /
hso/hsolink-1.0.118/missing
hso/hsolink-1.0.118/AUTHORS
hso/hsolink-1.0.118/config.status
hso/hsolink-1.0.118/NEWS
hso/hsolink-1.0.118/config.h
hso/hsolink-1.0.118/config . h.in
hso/hsolink-1.0.118/INSTALL
hso/hsolink-1.0.118/stamp-h1
hso/hsolink-1.0.118/depcomp
hso/hsolink-1.0.118/src/
hso/hsolink-1.0.118/src/Makefile
hso/hsolink-1.0.118/src/hsolinkcontrol.8
hso/hsolink-1.0.118/src/.deps/
hso/hsolink-1.0.118/src/.deps/main.Po
hso/hsolink-1.0.118/src/Makefile.in
hso/hsolink-1.0.118/src/Makefile.am
hso/hsolink-1.0.118/src/main.c
hso/hsolink-1.0.118/install-sh
hso/hsolink-1.0.118/configure
hso/hsolink-1.0.118/ChangeLog
hso/hsolink-1.0.118/configure.ac
hso/hsolink-1.0.118/Makefile
hso/hsolink-1.0.118/README
hso/hsolink-1.0.118/aclocal.m4
hso/hsolink-1.0.118/COPYING
hso/hsolink-1.0.118/config.log
hso/hsolink-1.0.118/Makefile.in
hso/hsolink-1.0.118/Makefile.am
hso/CHANGELOG
hso/icon225.pl
hso/hso.udev
hso/connect.sh
hso/Module.markers
hso/Makefile
hso/hso.c
hso / hso
README / rezero
hso / hso .conninfo.ini.swp
/ install.sh
hso/hso-1.6 /
hso/hso-1.6/init.cht
hso/hso-1.6/CHANGELOG
hso/hso-1.6/connect.sh
hso/hso-1.6/Makefile
hso/hso-1.6/hso.c
hso/hso- 1.6/README
hso/hso-1.6/setpwr.sh
hso/hso-1.6/hso_connect.sh
hso/hso-1.6/stop.cht
hso/hso-1.6/dial. cht
Now we go to the folder
Hso that has created after unpacking:
julian @ julian-aspire: ~ $ cd hso
And Hso Directory run the command:
julian @ aspire: ~ / hso $
sudo. / install.
sh package list ... Done
Building dependency tree Reading
state information ... Done
following packages will be installed NEW: hsoconnect-py2.5
0 upgraded, 1 newly installed, 0 to remove and 33 not upgraded.
need to download file 176kb.
be used 1589kB of additional disk space after unpacking. Des
: 1 http://archive.ubuntu.com intrepid / universe hsoconnect-py2.5 [176KB]
Downloaded 176kb in 14s (12.5 kB / s) Selecting
hsoconnect-PY2 package. 5 previously selected.
(Reading database ...
105111 files and directories currently installed.)
or old ones used instead.
Reading package lists ... Done
Building dependency tree Reading
state information ... Done
linux-headers-2.6.27-7-generic is already the newest version.
build-essential is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
checking for a BSD-compatible install ... / Usr / bin / install-c
checking whether build environment is sane ...
yes checking for a thread-safe mkdir-p ... / Bin / mkdir-p
checking for gawk ...
no checking for mawk ... mawk checking whether
make sets $ (MAKE) ... yes checking
for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
make all-recursive
make[1]: se ingresa al directorio `/home/julian/hso/hsolink-1.0.118'
Making all in src
make[2]: se ingresa al directorio `/home/julian/hso/hsolink-1.0.118/src'
gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT main.o -MD -MP -MF .deps/main.Tpo -c -o main.o main.c
main.c: In function 'main':
main.c: 52: warning: format not a string literal and no format arguments
main.c: 60: warning: format not a string literal and no format arguments
main.c: 118: warning: format not a string literal and no format arguments
main.c: 127: warning: format not a string literal and no
format arguments main.c: 139: warning: format is not a string literal and no format arguments
main.c: 145: warning: format not a string literal and no arguments
format main.c: 133: warning: ignoring return value of 'system', declared with attribute warn_unused_result
mv-f .deps / main.Tpo .deps / main.Po
gcc-g-O2-o main hsolinkcontrol. or
make [2]: Leaving directory `/ home/julian/hso/hsolink-1.0.118/src '
make [2]: Leaving directory` / home / julian / hso / hsolink -1.0.118 '
make [2]: Leaving directory `/ home/julian/hso/hsolink-1.0.118'
make [1]: Leaving directory` / home / julian / hso / hsolink-1.0.118 '
Making install in src
make [1]: Entering directory `/ home/julian/hso/hsolink-1.0.118/src '
make [2]: Leaving directory` / home/julian/hso/hsolink-1.0.118/src'
test-z "/ usr / local / bin"
make [1]: Leaving directory `/ home/julian/hso/hsolink-1.0.118/src '
make [1]: Leaving directory` / home/julian/hso/hsolink- 1.0.118 '
make [2]: Leaving directory `/ home/julian/hso/hsolink-1.0.118'
make [2]: Nothing to be done for` install-exec-am ' .
test-z "/ usr / local / share / doc / hsolink"
make [1]: Leaving directory `/ home/julian/hso/hsolink-1.0.118 '
If the compilation ne marche pas, tentez dpkg-i - force-architecture-1.0.46 hsolink
-1_i386.deb Selecting package-py2.5 hsoconnect previously selected.
(Reading database ...
155416 files and directories currently installed.)
hsoconnect-py2.5 Unpacking (of hsoconnect-py2.5_1.1.83_all.deb) ... Configuring
hsoconnect-py2.5 (1/1/1983) ...
Processing triggers for man-db ...
Compiling module rm-f-f *. mod .* *. Mod *. o *. ko .*. o.cmd ko.cmd *. .*. flags.
lst-f rm-f *. lst *. symvers Module modules.order * ~ rm
-f-rf / home / julian / hso / tmp conninfo.ini
rm-f-rf. tmp_versions
mkdir-p / home / julian / hso / tmp / .tmp_versions
make-C / lib / modules/2.6.27-7-generic/build M = / home / julian / hso MODVERDIR = / home / julian / hso / tmp / .tmp_versions
modules make [1]: Leaving directory `/ usr / src/linux-headers-2.6.27-7-generic '
CC [M] / home / julian / hso / hso.o
Building modules, stage 2.
MODPOST 1 modules
CC / home / julian / HSO / hso.mod.o
LD [M] / home / julian / HSO / hso.ko
make [1] are dirty del Directorio `/ usr / src/linux-headers-2.6.27-7-generic '
Installing module
Installing scripts
* Loading hardware drivers ... Additional [OK]
Enter your PIN code in the file conninfo.ini
To start the connection:
Go to the directory HSO
then do sudo. / Connect.sh up
To cut login: sudo
. / Connect.sh down
ou utilisez l'interface graphique hsoconnect
NOTE: Now you should connect the Modem and edit the following files as I will show you exactly equals:
julian @ julian- aspire ~ / hso $ sudo gedit conninfo.ini
and copy the following as Appearance:
# this file contains the connection information for yuor subcriscription
APN = internet-entreprise
USER
= orange = orange
PASS PIN = PONES_TU_PING
Okay, now we are
Menu + Internet + HSOconnect and see the box below:
Then you ask for the pin:
intruduce your
Pin:
Click Connect and continuing with the following:
Now once you open the console and from the Board Hso, run the following command:
julian @ julian-aspire: ~ / hso $ sudo. / connect.sh
up [sudo] password for julian:
Initializing ... Trying
orange.es ...
Connecting ... Trying Trying-
Connected Setting IP address to 62.32.190.163 Adding route Setting nameserver
Done.
and as you can see, the digits of the traferencias are climbing. NOTE:
If you have problems with the installation, try downloading and Instaladote
these two packages. Deb
:
Download and install
hsolinkcontrol (hsolink i386 deb)
Download and install HSOconnect
is the same as above but the packages are ready for clicking on them with the
right click and select "Open With Manager gdebi package "
For if you keep exactly these explanations I assure you log in, I'm writing this post with my recent extrenar 3G Connection and Modem
Icon-225.
A GREETING.
PUDI.
0 comments:
Post a Comment