Lump Came Out My Nose

"The Cisco TelePresence" in numbers (Cisco Telepresence)

10

were the requirements of the marketing people happened to engineering as a basis for developing
• TelePresence screens
3 "super high definition" up the CT model 3000P 1080 x
1900 is the resolution of the image of each of the screens and each of the cameras (one camera per screen).
65 "is the size of each screen.
4 20 Amp outlets needed for CTP3000.
• 10
• paliet is what holds the CTP3000p when this ENVAL.
7975 is the model of Cisco IP phone to control your computer using TelePresence (instead of a remote control).
• 4
are models of end-point telepresence (3000, 3200, 1000 and 500).
400 KB or more should be the input buffer switch which connects the end-poing.
1740 packets per second transmitted CTP3000 in maximum image quality.
1 Gbps interface must be the switch to which it connects.
5.5 Mbps occupies each of the video streams (the CTP3000 uses 3 flows). 200
restardo is more than the maximum allowed on the link to point to point.
40 ms is the maximum jitter
0.2% packet loss is the maximum allowed
• 
  

48

are video streams that can handle Connferencia Multipoint equipment.
15 ms is the delay added by the eqiupo Multipoint (no transcoding).
240 Mbps maximum wattage kind that yields would be the team Multipoint network.
• 
  

Approximately 1000 are equipment already installed and the world.

but about 300 are Cisco are for internal use.
• 
  and finally .... let's talk about price, but never mentioned it, we're talking about to put two points with a CTP3000 may be a little below the $ d

500,000!