Hi Tod @ s. If you followed the guide Create Free domain, you will need NOIP2 Client Install , then let it. first open the console and you navigate to the directory where you downloaded the client to NOIP2. julian @ ubuntu: / $ cd Downloads When we are in the directory, unpack the package:
noip-duc-linux.tar.gz julian @ ubuntu: ~ / Downloads $ tar xvf noip-duc-linux.tar.gz
noip-2.1.7 /
noip-2.1.7/._.DS_Store noip-2.1.7/.DS_Store noip-
2.1.7/binaries /
noip-2.1.7/binaries/noip2-Linux-32bit
noip-2.1.7/binaries/noip2-Linux-64bit
noip-2.1.7/COPYING
noip-2.1.7/debian.noip2.sh noip-2.1.7/gentoo.noip2.sh noip-2.1.7/LEEME.PRIMERO noip-2.1.7/LISEZMOI.ENPREMIER
noip-2.1.7/mac.osx.startup
noip-2.1.7/Makefile
noip-2.1.7/noip2.c noip-2.1.7/README.FIRST noip-2.1.7/README.FIRST-SWE noip-2.1.7/README.FIRST.FRANCAIS noip-2.1.7/README.FIRST.ITALIANO noip-2.1.7/README.FIRST.JAPANESE
noip-2.1.7/README.FIRST.pt_BR
noip-2.1.7 / redhat.noip.sh
NOTE: always very
that usually contain the TAR
Packages, which will give you instructions for compilation and program settings to which they relate. Vale
now changed and we see the content NOIP2-1-2-7 (Unzip it to created)
julian @ ubuntu: ~ / Downloads $ cd
noip-2.1.7 & & ls
binaries
LEEME.PRIMERO ~ noip2.c README.FIRST.pt_BR
COPYING LISEZMOI.ENPREMIER README.FIRST-SWE README.FIRST
debian.noip2.sh mac.osx.startup README.FIRST. FRANCAIS redhat.noip.sh
gentoo.noip2.sh Makefile README.FIRST.ITALIANO
LEEME.PRIMERO noip2 README.FIRST.JAPANESE
As the directory that interests us is:
binaries, but first let run the command to create the MAKE
Binary NOIP :
julian @ ubuntu: ~ / Descargas/noip-2.1.7 $
make gcc-Wall-g-O2-DLINUX-DPREFIX = \\ "/ usr / local \\"-o noip2 noip2.c
Vale, switched to binaries:
julian @ ubuntu: ~ / Descargas/noip-2.1.7 binaries cd $
The following command is REQUIRED
that executed as ROOT, I have tried with SUDO and has given me a mistake because we became ROOT
julian @ ubuntu: ~ / Descargas/noip- 2.1.7 $ its
Password:
and type the following:
root @ ubuntu: / # home/julian/Descargas/noip-2.1.7
make install if [! -D / usr / local / bin]; Then mkdir-p / usr / local / bin; fi if [! -D / usr / local / etc] Then mkdir-p / usr / local / etc; fi cp noip2 / usr/local/bin/noip2 /usr/local/bin/noip2 -C -c /tmp/no-ip2.conf
Auto configuration for Linux client of no-ip.com.
Multiple network devices have been detected.
Please select the Internet interface from this list.
By typing the number associated with it.
0 eth0
1 ppp0 (MARCA NUMERO INTERFAZ ACCESO INTERNET
)
1
Please enter the login/email string for no-ip.com xxxxxxx@hotmail.com
Please enter the password for user 'xxxxxxxx@hotmail.com' ******** Only one host [linux1488.no-ip.biz] is registered to this account.
It Will Be used.
Do you wish to run Something at Successful update? [N] (y / N) and
Please enter the script / program name
InicioNOIP
New configuration file '/ tmp/no-ip2. conf 'created.
mv / tmp/no-ip2.conf / usr/local/etc/no-ip2.conf
As Compile and Install the Client NOIP, a few questions you enter your details and already. WARNING: Question: Do Something you wish to run at Successful update? [N] (Y / N) Please enter the script / program name noipscrit
NOIP2
wondering if you want to create the SCRIPT that launches the client every time you turn your equipment if it accepts must enter a name for SCRIPT
and press ENTER
.
already have installed and configured our Customer NOIP2 then the commands will show you NOIP2:
noip2-C
configure the client to run the client noip2
noip2-S displays information about customers running
pid
noip2-D changes the status of debugging for the client pid
noip2-K pid pid customer ends
NOTE: if you fail
All these commands You must run the Directory:
/ usr / local / bin / by Example:
To SET:
julian @ ubuntu: / usr / local / bin $ sudo noip2-C
Auto configuration for Linux of no-ip.com client.
Have Been Multiple network devices detected.
Please select the Internet interface from this list.
By typing the number associated with it.
0 eth0 1 ppp0
1
Please enter the login/email string for no-ip.com xxxxxxxxx@hotmail.com
Please enter the password for user 'xxxxxxx@hotmail.com' ********
Only one host [linux1488.no-ip.biz] is registered to this account.
It will be used.
Do you wish to run something at successful update?[N] (y/N) y Please enter the script/program name InicioNOIP New configuration file '/usr/local/etc/no-ip2.conf' Created.
To INICIARLO:
Julian @ ubuntu: / usr / local / bin $ sudo
noip2
noip2 One process is active Already,
and the multiple instance flag (-M) is not set.
To see Status:
Julian @ ubuntu: / usr / local / bin $ sudo noip2-S
noip2 an active process.
19815 Process, started / usr/local/bin/noip2 (version 2.1.7)
Using configuration from / usr/local/etc/no-ip2.conf
Last IP Address 0.0.0.0 September
Account xxxxxxxx@hotmail.com
configured for: linux1488.no-ip.biz host
Executing username = XXXXXX% 40hotmail.com & pass = XXXXXXX & h [] = Successful linux1488.no-ip.biz upon update. Address
check every 1 minute, Directly connected via / dev/ppp0.
To CHANGE
and l
state PURIFICATION
for NUMBER
of PROCESS (pid) client:
julian @ ubuntu: / home / julian / $ Descargas/noip-2.1.7/binaries Sudo noip2-D
PID No. 19815
Process - debug activated.
NOIP2 To
STOP:
julian @ ubuntu: / home/julian/Descargas/noip-2.1.7/binaries $
noip2 sudo-K 28558 28558
Process terminated.
If you do not know how to see the number of processes, run this command in a console:
julian @ ubuntu: / usr / local / bin $
sudo ps-aux
22204 0.0 0.0 3020 784 pts / 0 S + 17:20 0:00 grep noip2
Parameters To learn more about The Command
of NOIP1, Type: julian @ ubuntu: ~ $
noip2 And
USAGE: noip2 [-C [-F] [-Y] [-U # min]] [-c file]
[-d] [-D pid] [-i addr] [- S] [-M] [-h]
Linux-2.xx Version
Options:-C create configuration data
-F force NAT off
-Y select all hosts/groups
-U minutes set update interval
-c config_file use alternate data path
-d increase debug verbosity
-D processID toggle debug flag for PID -i IPaddress use supplied address -I interface use supplied interface -S show configuration data -M permit multiple instances -K processID terminate instance PID
-h help (this text) is
For the initial run the system simply appends to the startup programs in my case (Ubuntu) is in System-> Preferences-> SECTIONS-> New
In Name as you want for example Customer No-IP
In Command is
/ usr/local/bin/noip2
Well I'm already, Howrah GOOGLE tide a little and learn more things about NO-IP.
A GREETING.
PUDI.
0 comments:
Post a Comment